Subsea_Maintain

Cables Equipment

3-Wheel Pair Cable Engine

3-Wheel Pair Cable Engine

The 3-wheel pair cable engine can be used to haul cable for loading onto a vessel and to recover cable from the seabed. The unit can also act as a hydraulic brake to maintain the correct amount of speed and residual tension for laying cable onto the seabed.

Electro / Hydraulic Power Pack to Drive the 3-Wheel Pair Cable Engine

Electro/Hydraulic Power Pack to Drive the 3-Wheel Pair Cable Engine

The unit comprises an electric motor which drives a variable displacement hydraulic power pump, linked to gear type pumps, to power the motors and hydraulic cylinders of the 3-wheel pair cable engine. A blast air cooler is used within the hydraulic circuit to stop the system overheating.

4-Wheel Pair Cable Engine

4-Wheel Pair Cable Image

The single wheel pair drive wheels can be used to haul cable for loading onto a vessel and for recovery of cable from the seabed. The wheels can also act as a hydraulic brake to maintain the correct amount of speed and residual tension for laying cable onto the seabed. There are four sets of wheels available.

Electro / Hydraulic Power Pack to Drive the 4-Wheel Pair Cable Engine

Electro/Hydraulic Power Pack to Drive the 4-Wheel Pair Cable Engine

The unit comprises an electric motor which drives a variable displacement hydraulic pump, linked to gear type pumps, to power the motors and hydraulic cylinders of the 4-wheel pair cable engine. Water coolers are provided in the hydraulic circuit to stop the system overheating.

5 Tonne Automower Winch

5 Tonne Automower Winch

The Automower winch is driven by a diesel engine and comes with either a right or left hand barrel end. The unit is used for mooring and cable recovery. An advantage of the 5 Tonne Automower winch is the ability to use the main winch drum and the barrel end simultaneously.

5 Tonne Thompson Winch

5 Tonne Thompson Winch

The Thompson winch is driven by a diesel engine, which drives a barrel end. The unit is used for cable recovery and for rotating cable drums using an endless rope drive, running from the winch to a drive band on the drum. Due to the portability of the unit, it is suitable for pulling shore ends of cable.

10 Tonne TR2 Winch

10 Tonne TR2 Winch

The TR2 winch is driven by a diesel engine and comes in both short and long barrel versions. The unit is used for mooring and cable recovery.

Alligator Cable Cutter

Alligator Cable Cutter

The Alligator cable cutter is used for cutting both telecom and power cable to a maximum of approximately 200mm diameter. The unit cuts cable in one fast cut and is particularly useful for scrapping cable on board the vessel during recovery.

Cable Coiling Arms

A variety of Cable Coiling Arms are available to suit a range of coil diameters and drop heights. The coiling tanks are made of tubular construction with a central tubular eye.

Cable Coiling Gantry Assemblies and Tanks

A variety of cable coiling gantry assemblies are available, to suit a range of coil diameters and drop heights. The coiling tanks are made of tubular construction with a central tubular eye.

Cable Deployment Chute

Cable Deployment Chute

Cable deployment chutes are available in a variety of shapes and sizes, to suit cable bending radius and application.

Caterpillar Cable Hauler

Caterpillar Cable Hauler

The small, lightweight Caterpillar Cable Hauler is complete with an integral electro / hydraulic power pack and used both to haul cable for loading onto a vessel, and recovery of cable from the seabed.

Single Wheel Pair Drive Wheels

The single wheel pair drive wheels can be used to haul cable for loading onto a vessel and recovery of cable from the seabed. The wheels will also act as a hydraulic brake to maintain the correct amount of speed and residual tension for laying cable on to the seabed.

Electro / Hydraulic Power Pack to Drive 1 to 4 Single Wheel Pairs

Electro/Hydraulic Power Pack to Drive 1-4 Single Wheel Pairs

The unit comprises an electric motor which drives a variable displacement hydraulic pump, linked to all gear type pumps, to power the motors and hydraulic cylinders of the single wheel pair hydraulic drive wheels. Water coolers are provided in the hydraulic circuit to stop the system overheating.

Hydraulic Cranes (3.5 - 17.5 Tonne Lifting Capacity)

Hydraulic Cranes

A range of hydraulic cranes are available, complete with electro / hydraulic power packs. Each crane has its own separate mounting base suitable for welding to a vessels deck.

Portier Caterpillar Cable Engine

Portier Caterpillar Cable Engine

The Portier Cable Engine can be used to haul cable for loading onto vessels and recovery from the seabed. It can also be used to lay cable onto the seabed, maintaining the correct amount of speed and residual tension.

Roller Quadrants and Straight Roller Track

Roller Quadrants and Straight Roller Track

Roller Quadrants are available to suit a variety of cable bending radiuses, together with a selection of straight roller track sections.